oz
if an amp is 20-20,000Hz
and speakers are 25-32,000
what happens with those 20,000-32,000Hz
do they not get played
can any one tell me what to look for in speakers specs.
things like db?
and what i should look for in an amp's specs.
besides watts
thanx all info helps.
Answer
correct, the 20,000 and higher don't get played. In truth your ear can't hear them anyway. A healthy young person might be able to hear up to 18khz, but probably only in a laboratory audio test.
The reason speakers are spec'd to 32khz is because it's only 1 octave above 16khz, which is audible. so a sepaker spec'd to 32k shouldn't distort 16khz.
As for what to look for, it is a safe bet to keep the speakers 'rated' power (not max power) equal to the max output of the amplifier. People often run amps into distortion, even without noticing. By keeping the rated power that high the speakers should not blow out.
The better way to judge the quality of a speaker is the sensativity rating. this equates to how much volume you get from the power put into the speaker. a low number means a stiff unresponsive speaker, which usualy means poor sound quality.
if the manufacturer puts the EQ curve on the box this indicates the volume of sound based on the frequecy for the same power input. ideally you want flat accross the spectrum. But more important is the low end roll off. If you aren't running a subwoofer, you don't want speakers with a high freq rolloff, or you'll miss that bass.
correct, the 20,000 and higher don't get played. In truth your ear can't hear them anyway. A healthy young person might be able to hear up to 18khz, but probably only in a laboratory audio test.
The reason speakers are spec'd to 32khz is because it's only 1 octave above 16khz, which is audible. so a sepaker spec'd to 32k shouldn't distort 16khz.
As for what to look for, it is a safe bet to keep the speakers 'rated' power (not max power) equal to the max output of the amplifier. People often run amps into distortion, even without noticing. By keeping the rated power that high the speakers should not blow out.
The better way to judge the quality of a speaker is the sensativity rating. this equates to how much volume you get from the power put into the speaker. a low number means a stiff unresponsive speaker, which usualy means poor sound quality.
if the manufacturer puts the EQ curve on the box this indicates the volume of sound based on the frequecy for the same power input. ideally you want flat accross the spectrum. But more important is the low end roll off. If you aren't running a subwoofer, you don't want speakers with a high freq rolloff, or you'll miss that bass.
Car specs websites?
Tharun Che
Is there a website where I can find different car specs and compare side to side without the trouble of typing it into google?
including older models
Answer
www.vehix.com You can compare vehicles up to 10 years old side by sied and the site will give you every bit of info you can think of.
www.vehix.com You can compare vehicles up to 10 years old side by sied and the site will give you every bit of info you can think of.
Powered by Yahoo! Answers
No comments:
Post a Comment